The hammermill ARTHOS shreds thoroughly and quickly waste wood, green waste, substitute fuels and PVC-waste.
Depending on the material and the desired end product (of 30 – 150 mm) special HAAS hammer-, counter knife- and screen basket-systems will be used. With the help of individual matched counter knive- and screen basket-systems the unwanted fine fraction will be reduced to a minimum. HAAS hammermills are immune to interference and low on maintenance!
The special ballistic chute protects the hammermill from wear and machine breakage.
Impurities like ferrous and non-ferrous metals etc., which made it into the hammermill with the material had to be removed manually and very time consuming in the past. “Time is money”, that was the thought of the HAAS-developers und they started to work.
Impurities in the input material are automatically separated. The system has been in stationary use for several thousand operating hours at many well-known power stations and in the chipboard industry worldwide and has proven itself. The machine does not have to be stopped to remove the impurities, thus downtimes are significantly minimized and costs thereby reduced!
|Model||Infeed width||Infeed height||Rotor ø||Drive||Capacity up to|
|1.000 mm||1.200 mm||1.200 mm||90 - 200 kW||18 t/h*|
|1.300 mm||1.200 mm||1.200 mm||132-315 kW||25 t/h*|
|1.600 mm||1.200 mm||1.200 mm||160-400 kW||45 t/h*|
|2.000 mm||1.200 mm||1.200 mm||315-630 kW||80 t/h*|
* Throughput based on an average grain size of 60 – 80 mm with a normal and continuously feeding and average degree of impurities.